To book an acer swift SF114 screen repair @ $130 + optional pickup and return @ $40. Please call us at 02 8081 2555 or click here to book a repair online.
The acer aspire switf 1 SF114 has a 14″ SLIM LED screen with resolution 1366 x 768 which is the standard resolution for most entry level laptops.
To replace an screen on the swift 1 SF114, You need a Philips screw driver and small flat screw driver. 
Always make sure the power adapter and battery are disconnected, press the power button for approx 30 seconds with battery and power disconnected to release any power stored in circuits.
1- Start by removing the screw covers using the small flat screw driver as shown in the picture below
2- Once the covers are removed, remove the screws, then remove the bezel.
on the bottom right, just few cms off the center of the bezel, there are some adhesive.
3- Once the bezel is off, remove 4 screws holding the screen to the lcd back cover, as show below (Philips 0 screw driver)
4- Once the screws are removed, tilt the screen forward so it rests on the keyboard, and remove the LCD Cable (cable connecting LCD to motherboard).
You want to be very careful dealing with this cable, in case of any damage the repair will be a little expensive.
5- Once the cable is unplugged, you can remove the screen and connect the new screen, also be careful to short or damage the lcd cable or connector
6- Before applying the lcd bezel, make sure you test the screen well and verify every thing is working, then apply the bezel.
This Article applied to all acer Swift SF411 non-touch screen models.
To book an acer swift SF114 screen repair @ $130 + optional pickup and return @ $40. Please call us at 02 8081 2555 or click here to book a repair online.
